DoppstadtAK 540 Stationary
The flail drum of the AK 540 measures 1.75 m in width and 1.1 m in diameter which doesn't exactly make the machine a contender for slimness awards. However, the dimensions are ideal for operation in compost works and treatment plants where bio waste, green waste, bio mass and waste wood are to be processed at high throughput rates.
On every account, the AK 540 is perfectly prepared for all grinding tasks. The machine features overlapping flail rows for better grinding results. The flails swing freely and evade oversized contaminants, thereby significantly reducing mechanical wear.
The scraper floor of the AK 540 is another example of maximum efficiency. 32 built-in bars ensure the quick transport of the incoming material. Like main drive and feed roller, the scraper floor is powered by a load-dependent motor control unit. It optimizes both throughput rates and operational economics of the machine.
Not yet satisfied with what the standard configuration of the AK 540 has to offer? Take take a look at the available additional equipment. From lower discharge conveyor and hopper extension to wireless remote control and Profibus interface there are so many options to further enhance the already impressive performance of this stationary grinder.
The stationary grinder AK 540 can be used to grind biowaste and green waste in composting plants, for different qualities of wood in waste wood processing plants, in biomass processing plants and for various grinding tasks in the field of recycling.
- Main drive, scraper floor and feed-in drum are precisely coordinated and controlled by frequency converter thus ensuring an optimal utilization of the machine and a continuous material infeed by direct, electric load-sensing of the drive units.
- Flail rows topologically overlap for a better grinding result
- Free swinging flails, retracting in case of contaminants
- Quick-changing system for the baskets
- Optimized safety system with sensor-less standstill monitoring
- Easy transport, because the machine is delivered ready assembled with base frame and discharge conveyor in one.
- Quick mounting and commissioning thanks to BUS control. Therefore reduction of the required cable routing.
|Total weight (kg)||Approx. 22000|
|Transport width (mm)||2626|
|Transport height (mm)||2932|
|Transport length (mm)||7883|
|Engine type||AC-motor frequency driven|
|Motor power (kW / PS)||315 / 430|
|Installed power (kW)||335|
|Belt speed (m/s)||0,5|
|Loading height (mm)||3.046 using a 900 mm steel framework|
|Number of Flail teeth||36|