DoppstadtDH 910 SA-B E Mobile
Mounted on a tri-axial semitrailer chassis the precision chipper DH 910 SAB E produces wood chips of the highest grade thanks to its closed rotor and the perfect adjustment of screen basket and blade advance. The longer-than-usual in-feed unit permits even very long pieces of wood to be chipped with maximum performance and effectiveness.
The full-steel chipping drum is fit into solid steel frames, while the special arrangement of the chippings knives makes the DH 910 SAB E run with a minimum amount of vibration and ensures perfectly shaped chips from all types of wood. These are discharged by way of a rear conveyor swiveling up to 90 degrees.
Despite its great strength the DH 910 SAB E shows no signs of sluggishness and is ready for use within minutes. Large smooth-running doors and centralized lubrication points greatly help facilitate maintenance. The chipping knives can be re-shapened for a much longer service life, even while running at great intensity.
Additional equipment such as a damping facility and discharge arm lightning provides for a great variety of possible fields of operation.
Producing wood chips at full speed – with the DH 910 SAB E this runs like clockwork.
The precision chippers of the DH series 910 process waste wood, wood slabs, log and industrial wood as well as preshredded and stoned root timber to different sizes of wood chips. The machines can handle trunk diameters up to 900 mm temporary.
- Gentle, conveyor-based discharge for top-quality wood chips
- Swiveling rear conveyor enables set-up of large pits behind the machine
- High rotor weight for constant rotation speed and low consumption
- Mountable on semitrailer chassis for easy transportation
- Wood chips of exceptional quality thanks to closed rotor construction
|Total weight (kg)||30000|
|Length (mm)||ca. 20000|
|Transport width (mm)||2500|
|Transport height (mm)||4000|
|Transport length (mm)||2370|
|Engine type||electrical drive|
|Motor power (kW / PS)||450 / 612|
|LOWER SCREENING DECK|
|Logdiameter Hardwood (mm)||700|
|Logdiameter Softwood (mm)||900|
|Infeed height (mm)||900|
|Infeed width (mm)||1000|
|Rotor Diameter (mm)||1300|
|Rotor Width (mm)||1000|